11 Responses to “From Zero to Hero with Matthew “theginger45” Hunt (Part 1)”

  2. florianm1

    is there actually a way to filter exactly for certain hands in hem2? lets say we loose 500BB on 100hands with A5s by calling a 3bet. we could easily look at 100hands and analyze what went wrong

  4. akkseth

    Hey is there a problem with the rest of the series? I get an error for each other vid. Cheers guys. Leaning a lot, keen to get to the rest.

  6. theginger45

    You can definitely do this. You can use filters to look at all instances where you had A5s and called a 3-bet, and that should give you the hands you need, in the bottom half of the screen display.

  7. DarkLady

    Good series, informative. Could you define the terms a little. You used the term, “flapping”. Terms like these need clarification for some.

  9. Jon_Allan

    I noticed a little gotcha for the bb/100 and EV bb/100 in the overall report in the tournament reports on HM.
    You may, like me, want to filter out Ante-Up tournaments (I filtered out Blinds greater than 5).
    I have 186K hands in my current tournament db and it suggests I ran 6.02bb/100 under EV.
    Once I filter out the 383 hands (yes, just 383) from Ante-Up tournaments it shows 0.43bb/100 under EV – much more in line.
    It’d be nice, of course, if one could work entirely in M and not need such a filter, since ante/bb and the number of villains both vary a little during standard tournament play too, but not only are m/100 stats unavailable, the ante filter has units of chips rather than bbs.

Leave a Reply

You must be logged in to post a comment.